10mw Fiber Optic Visual Fault Locator 2.5mm connecter Mini Red Laser Tester Testing Tool

A brief introduction: the red light pen is also called a light pen, pen-type red light source, visible light detection pen, fiber fault detector, fiber fault locator, etc. Most of them are used to detect fiber breakpoints, FC, SC, ST common interfaces, if you need to test LC interface can contact us to buy the converter! 

Two functions: fiber fault, bending and other fault location; OTDR blind zone fault check; end-to-end fiber identification; mechanical connection point optimization. 

Three applications: telecommunications, CATV engineering, and maintenance;

 integrated wiring construction and maintenance; optical device production and research; another fiber engineering. Four technical indicators: 

1, The source wavelength: 650 + 10nm. 

2, Single-mode output power: 1/10/20/30 mW and other options. 

3, Power: 2 7th battery. 

4, About 147 * 55 * 35mm with package 

5, The weight is about 0.07KG (including packaging and accessories).