Patch Cord Production Line Equipment-Automatic Vertical/Horizontal Pneumatic Crimping Machine

Patch Cord Production Line Equipment-Automatic Vertical/Horizontal Pneumatic Crimping Machine

HORIZONTAL/vertical PNEUMATIC CRIMPING MACHIN
1.  For the connector assembly and the ceramic ferrule and metal tail stock assembly of other products Crimp.
2.  Use air pressure of not less than 0.6 ~ 0.9Mpa, the maximum pressure 1000kgf.
3.  By replacing the crimp tooling can be adapted to different parts assembly and crimping.
4.  Pressure adjustable to adapt to different products.
5.  Simple, reliable, and efficient processing.
6.  Stable quality.
7.  Maintenance, maintenance is simple and convenient.
8.  Provide connector crimping dies, adapters and metal tailstock crimping dies.
9.  According to customer needs, customized different crimping tooling.
10. Voltage: DC12V
11.Weight: 55Kg
12. Max. Pressure: 1000Kg
13. Max. Air pressure: 0.8Kg

Tail ring electric crimping machine
1.   For the connector assembly and the ceramic ferrule and metal tail stock assembly of other products crimp.
2. By replacing the crimp tooling, can adapt to different parts assembly and the crimping.
3.  Pressure can be adjusted to adapt to different products.
4.  Simple, reliable, high processing efficiency.
5.  Stable quality.
6.  Maintenance, simple and convenient.
7.  Provide the connector crimping dies, adapters and metal tailstock pressure dies.               

8.  According to customer needs, custom-made different crimping tooling.

MPO special pneumatic crimping machine

1.   For the connector assembly and the ceramic ferrule and metal tail stock assembly of other products crimp.
2.  Use air pressure is not less than 0.6 ~ 0.9 Mpa, the maximum pressure for 1000 kgf.
3.  By replacing the crimp tooling, can adapt to different parts assembly and the crimping.
4.  Pressure can be adjusted to adapt to different products.
5.  Simple, reliable, high processing efficiency.
6.  Stable quality.
7.  Maintenance, simple and convenient.
8.  Provide the connector crimping dies, adapters and metal tailstock pressure dies.
9.  According to customer needs, custom-made different crimping tooling.

One-shot crimping machine
1.  This machine is used for crimping aluminum rings during the manufacture of the optical fiber patch cord. The work is done by one shot,
steady and not easy to lose.
2.  The booster cylinder’s max pressure could reach 1 ton.
3.  The crimping mold is cast at one time. Heat treatment enables the hardness to reach HRC63.
4.  It can also be used for MPO, MTP, 7.0mm cable crimping.    
5. Voltage: DC12V
6. Weight: 55Kg
7. Max. Pressure: 1000Kg
8. Max. Air pressure: 0.8Kg

Automatic ceramic ferrule crimping machine
Used for ceramic ferrule metal flange crimping.
Use PLC control system. Automatic crimping is better and quicker.
Crimping fixtures can be replaced for different components assembly or crimping.
Easy operating and high working efficiency are realized.
Stable working quality and easy for repair and maintenance.
Crimping mold for connectors, adaptors, and the metal flange are available at request.
A customized crimping tool is available.
Voltage: 220-240V
Power: 700w
Weight: 160kg
Size: 750*1200*860mm
Crimping efficiency: 4200-6000pcs/hr
Operating mode: Automatic