Fiber Optical Ethernet Media Converter 16 Port

Main features:

In conformity with the following

◆ IEEE802.3　 10Base-T standard

◆ IEEE802.3U　100Base-TX/FX standard

◆ IEEE802.3X　standard

Interface transmission rate:

◆ Optical interface: 155Mbps

◆ Electrical interface: 10/100Mbps

◆ Automatic identification with cross line and through line

◆ KXT-100D can use either cross line or through line for connection with the devices such as switch or server.

◆ TX LINK/ACT lamp “On” indicates the correct interconnected link

Duplex supportive:

◆   KXT-100D Series supports full/half duplex adaptive and 10/100M adaptive

    Network cable

    10/100Base-TX UTP 5

◆ 100Base-FX: single mode fiber　8.3/125，8.7/125，9/125 or 10/125μm

◆ Multimode fiber    50/125, 62.5/125 or 100/140μm 

Transmission range:

◆ 10/100Base-TX：100 m

◆ 100Base-FX：2km (multimode)

◆ 25/40/60/80/100 km (single mode)

Avelength:

◆ 1310nm（single mode 25km,40km,60km）

◆ 1550nm (single mode 80km, 100km)

◆ 1310/850nm (multimode 2km)

LED display:

◆   PWR: power indicator lamp

◆   FX LINK/ACT: optical link connecting/ active status indicator lamp

◆   TX LINK/ACT: electrical link connecting/ active status indicator lamp

◆   FX100: optical interface rate indicator lamp

◆   TX100: electrical interface rate indicator lamp

◆   FDX: full/half duplex indicator lamp

Power requirement:

◆  Outside power suppl5VDC　 1A

◆  Power consumption: ＜5W

◆  Built-in power supply: 220VAC,　-48VDC

◆  Power consumption: ＜5W

Interface configuration:

◆   One RJ45　10/100Base-TX interface

◆   One SC/ST/FC single/multi mode duplex connector

Dimensions:

  ◆  Outside power supply: 26mm×71mm×94mm

◆  Inside power supply: 30mm×115mm×175mm

Environmental requirement :

 ◆  Operating temperature range :0℃～60℃

◆  Storage temperature range: -40℃～85℃

◆  Relative humidity: 5%～90%